|
PHONE:
419-525-1214
800-613-7206
FAX:
419-525-2386
E-MAIL:
byrne@byrnegroup.com
HOME PAGE
MICHAEL BYRNE EARTHBORING DIVISION
AUGERS
CUTTING HEADS
CASING AND SADDLE ADAPTERS
MICHAEL BYRNE BORING MACHINE |
|
D48-300 HEAVY DUTY MICHAEL BYRNE
Combination Boring & Jacking Machine
Features
- 125 hp @ 2400 RPM John Deere Water Cooled Diesel Engine
- 5 Speed Spicer Transmission ES60-5A
- 753,600 lb. Of Hydraulic Thrust Pressure
- 1,245,800 in. – LB of Maximum Output Torque
- 5,000 PSI Hydraulic System for Tough Boring Applications
- EXCLUSIVE Byrne Gear Triple Planetary Speed Reducer with 53.08 to
1 ratio
- EXCLUSIVE Drive Train Protection Thrust and Radial Load Bearing
package
- 48" Master Ring with Waste Ejectors with Safety Door
- Hydraulic Planetary Winch
- Returns Machine from Front of Track to Rear in 30 Seconds
- 32’ of Track – EXCLUSIVE Heavy Duty Construction with Quick
Connects
- EXCLUSIVE Hydraulic Powered Push Block
- EXCLUSIVE Combination Boring and Jacking System
- 3" or 4" Hex Drive
- EXCLUSIVE 1 Year Warranty
Weights
- Top Base – Power Unit: 8,000lb
- Bottom Base – Jacking Unit: 7,000lb
- Master Push Ring: 1,700lb
- Base Track: 3,500lb
Dimensions
- Bore diameter 48"
- Machine Height - Bottom of Track to Top of Lift Bail Lever (Stack
Removed): 6’4"
- Center Line of Bore to Bottom of Track: 30 ½"
- Base Track Length: 12’
- Track Width: 6’
|