|
PHONE:
419-525-1214
800-613-7206
FAX:
419-525-2386
E-MAIL:
byrne@byrnegroup.com
HOME PAGE
MICHAEL BYRNE EARTHBORING DIVISION
AUGERS
CUTTING HEADS
CASING AND SADDLE ADAPTERS
MICHAEL BYRNE BORING MACHINE |
|
D60-310 HEAVY DUTY MICHAEL BYRNE
Combination Boring & Jacking Machine
Feature
185 hp @ 2400 RPM John Deere Water Cooled Diesel Engine
5 Speed Spicer Transmission ES60-5A
1,004,800 lb. Of Hydraulic Thrust Pressure
1,785,428 in-LB of Maximum Output Torque
5,000 PSI Hydraulic System for Tough Boring Applications
EXCLUSIVE Byrne Gear Triple Planetary Speed Reducer with special
60" Master Ring with Waste Ejectors with Safety Door
34’ of Track – EXCLUSIVE Heavy Duty Construction with Quick
Connects
Hydraulic Planetary Winch
Returns Machine from Front of Track to Rear in 30 Seconds
EXCLUSIVE 34' of Heavy Duty Track with Quick Connects
EXCLUSIVE Hydraulic Powered Push Block
EXCLUSIVE Combination Boring and Jacking System
3" or 4" or 5" hex drive
EXCLUSIVE 1 Year Warranty
Weights
Top Base – Power Unit: 10,000lb
Bottom Base – Jacking Unit: 9,000lb
Master Push Ring: 3,000lb
Base Track: 4,500lb
Dimensions
- Machine Width: 54"
- Machine Height – Bottom of Track to Top of Muffler Stack: 6’9"
- Machine Height - Bottom of Track to Top of Lift Bail Lever
(Stack Removed) 6' 4"
- Center Line of Bore to Bottom of Track: 35"
- Base Track Length: 14’
- Track Width: 4’10"
|